history |
contact |
home1-800-256-6240
Got technical questions?
The original inventor.
Need to check order or shipping status?
Dimensions
Before ordering, you will need to know your seatpost extension and your seatpost diameter:
Seatpost Extension is determined by measuring the distance between the center of the saddle rails and the point where your seatpost enters your bike frame. NOTE: Be sure to have your saddle adjusted to the proper riding height before taking this measurement.
SEE CHART BELOW FOR REQUIRED CLEARANCES
Seatpost Diameter is determined by removing your current seatpost and noting the number stamped just below the minimum insertion line. If you can no longer read the number, you will need to take the seatpost to a local bike shop for sizing or have it measured using dial calipers for a precise measurement.You might also check the Sheldon Brown Technical Database for your size. We don't guarantee this data but have found it to be very dependable. The best indicator is still the stamped number on your existing seatpost.
Thudbuster seatposts are available in numerous exact-fit sizes:
Thudbuster LT & ST sizes
25.4 / 26.8 / 27.0 / 27.2 / 30.9 / 31.6 / 33.9If your bicycle frame requires a size other than one of those listed above, we can adapt either a 25.4 or a 27.2 Thudbuster to your bicycle using a machined aluminum shim. Check the drop down menu below to see a list of our standard shim sizes. If you still do not find your size, contact us and we will find a solution for your bike!
Standard Shim Sizes:
Reproduction of this material without written permission is strictly forbidden. © R.J. Concepts, Inc. All rights reserved.
Thudbuster R.J. Concepts 2951 North Plaza Drive, Suite 103 Rapid City, SD 57702 Phone (605) 718-7736 fax (605) 342-3233